Density / Specific Weight
For plastics the density is also seen as the specific weight of the material. Density is calculated by dividing the mass by the volume of the material and is usually expressed in g / cm3 . The specific gravity ( SG ) is defined as the ratio of the density of the material and the density of water (1 g / cm3) at a specified temperature. Ie: a material with a specific gravity less than 1 means that it will float on water.
For more information contact our consulting department.
*These data will be used for comparison and support in the material choice. We are not responsible for its use.
| Product | Material | Density (Low to High) |
|---|---|---|
| PE-HD 500 | Polyethylene | 0.5 |
| Nylatron 703 XL | Polyamide | 1.11 |
| Ertalon LFX | Polyamide | 1.13 |
| Nylatron LFG | Polyamide | 1.13 |
| Ertalon 66 SA | Poyamide | 1.14 |
| Ertalon 6 SA | Polyamide | 1.14 |
| Nylatron NSM | Polyamide | 1.14 |
| Ertalon 6 PLA | Polyamide | 1.15 |
| Ertalon 6 PLAM | Polyamide | 1.15 |
| Nylatron GS | Polyamide | 1.15 |
| Ertalon 6 XAU + | Polyamide | 1.15 |
| Nylatron MC901 | Polyamide | 1.15 |
| Nylatron GSM | Polyamide | 1.16 |
| Ertalon 4.6 | Polyamide | 1.19 |
| PC 1000 | Polycarbonat - PC | 1.20 |
| PSU 1000 | Polysulfone - PSU | 1.24 |
| PEI 1000 | Polyetherimide - PEI | 1.27 |
| Ertalon 66 GF30 | Polyamide | 1.29 |
| Duratron PBI | Polybenzimidazole - PBI | 1.30 |
| Ketron Peek 1000 | Polyetheretherketone – PEEK | 1.31 |
| Ertalyte | Polyethylene Terephtalate | 1.39 |
| Ketron Peek - CA30 | Polyetheretherketone – PEEK | 1.40 |
| Semiron ESd 410C | Plastic with Electrostatic Dissipation | 1.41 |
| Ertacetal C | Polyacetal | 1.41 |
| Duratron T4203 PAI | Polyamide - imide PAI | 1.41 |
| Techtron HPV PPS | Polyphenylene Sulfide - PPS | 1.42 |
| Ertacetal H | Polyacetal | 1.43 |
| Ertalyte TX | Polyethylene Terephtalate | 1.44 |
| Duratron T4301 PAI | Polyamide - imide PAI | 1.45 |
| Ketron Peek - HPV | Polyetheretherketone – PEEK | 1.45 |
| Ertacetal H-TF | Polyacetal | 1.50 |
| Ketron Peek - GF30 | Polyetheretherketone – PEEK | 1.51 |
| Semitron ESd 500HR | Plastic with Electrostatic Dissipation | 1.58 |
| PVDF 1000 | Polyvinylidene Fluoride - PVDF | 1.78 |
| Fluorosint 207 | Fluoropolymers | 2.30 |
| Semitron ESd 500HR | Plastic with Electrostatic Dissipation | 2.30 |
| Fluorosint 500 | Fluoropolymers | 3.32 |
| Tivar Burnguard | Polyethylene | 5 |
| Tivar 1000 EC | Polyethylene | 5 |
| Tivar 1000 | Polyethylene | 5 |
| Tivar DS | Polyethylene | 9 |
| Tivar 1000 ASTL | Polyethylene | 9 |
| Tivar 88 | Polyethylene | 9 |
| Tivar HOT | Polyethylene | 9 |
| Tivar Tech | Polyethylene | 9 |
| Tivar Ceram P | Polyethylene | 9 |
| Tivar DrySlide | Polyethylene | 9 |
| Tivar SuperPlus | Polyethylene | 9 |
| Tivar Ice | Polyethylene | N/A |